Use with pressing machine
1. Marking the sleeve and the bars, prepare the hydraulic tool, hydraulic pump and place the proper grip dies.
2. Insert the sleeve half way onto the continuation bar, using the marking as guide.
3. Start applying the required pressure on the sleeve.
4. Stop the swaging at the specified pressure for the given bar diameter and repeat this process as many times as required per model.
Place the continuation bars into the sleeves of the first bar and repeat swaging process on the continuation bar.
Size（mm） | Length（mm） | OD(mm) |
12 | 118 | 28 |
16 | 118 | 30 |
18 | 125 | 34 |
20 | 130 | 36 |
22 | 140 | 40 |
25 | 150 | 45 |
28 | 170 | 50 |
32 | 190 | 56 |
36 | 215 | 63 |
40 | 240 | 70 |
